Call (678) 940-0737
(678) 940-0737 (678) 940-0737

Landscape Lighting in Lawrenceville, GA

Good landscape lighting isn't about lighting up the whole yard — it's about lighting the path to your front door and making that oak tree look like it belongs in a magazine. We design it as one system, wired to a properly protected outdoor outlet, so it just works when the sun goes down.

8+ Years Experience
5.0 Star Rating
100% Satisfaction Guarantee
6K+ Happy Customers

Overview

Professional Landscape Lighting in Lawrenceville, GA

The fixtures are the easy part. What actually determines whether your landscape lighting looks great or looks patchy is the transformer sizing and the cable runs behind it — get those wrong and the lights at the far end of your yard come out dim no matter how good the fixture is. We walk the property with you first, agree on what's worth lighting, and then handle the electrical side so every fixture gets the same clean light.

Diagram of low-voltage path lights along a garden walkway
Light where people walk, a few features worth seeing, and no glare.

Landscape lighting we install

  • Path and walkway lights — spaced for safe footing without a runway look
  • Uplighting — trees, columns and house facades lit from the ground
  • Step and deck lighting — riser and post lights for stairs and decks
  • Driveway and entry lighting — so arrivals are visible and safe
  • Low-voltage transformers with timer, photocell or smart control
  • Repair of dead zones, dim fixtures and damaged buried cable

Why transformer sizing and voltage drop matter

Low-voltage fixtures run at 12 volts, so long cable runs lose voltage and the far fixtures come out dim. We size the transformer with headroom for the total wattage, use a heavy enough cable gauge, and split long runs into separate home runs or hubs so every fixture gets the same light.

Diagram of a GFCI-protected outdoor outlet that powers a landscape transformer
The transformer needs a weatherproof, GFCI-protected outlet to plug into.

How we install a landscape lighting system

  1. We walk the property with you, mark fixture positions and agree what should — and shouldn't — be lit.
  2. We install or upgrade a GFCI-protected, in-use-covered outdoor outlet for the transformer.
  3. We bury the low-voltage cable, set and aim the fixtures, and add a timer or photocell.
  4. We check the voltage at the end of each run and adjust the aim after dark so there is no glare.

Low-voltage landscape lighting design

Landscape lighting runs on 12 volts from a transformer plugged into an outdoor GFCI outlet. The low voltage means the wire can be direct-buried without conduit and the fixtures are safe to handle even when energised. We design the layout around three layers: path lighting for safety and wayfinding, accent lighting (uplights on trees, wall washes on architecture) for visual interest, and task lighting for outdoor living areas like patios and cooking spaces. Each zone gets its own home run to the transformer so you can control them independently.

Transformer sizing and wire runs

Undersized transformers are the most common landscape lighting problem we fix. If the wire run is long and the transformer is too small, the fixtures farthest from it get noticeably dimmer — that's voltage drop, and it shortens bulb life. We calculate the total wattage on each run, factor in the wire length and gauge, and size the transformer with at least 25% headroom for future additions. We also use the hub-and-spoke wiring method instead of daisy-chaining, which distributes voltage evenly so the last fixture on the run is as bright as the first.

Maintaining and expanding your landscape lighting

LED landscape fixtures last 30,000–50,000 hours, but the connections, lenses and transformers need periodic attention. Corrosion at wire connectors is the most common failure point in Lawrenceville's humid climate — we use waterproof, grease-filled wire nuts that seal out moisture. Lens clouding happens on cheap fixtures exposed to UV; the professional-grade brass and copper fixtures we install don't have that problem. When you're ready to expand, we check the existing transformer's capacity and wire sizing before adding fixtures, so the new zone doesn't starve the old one. If the transformer is maxed, we add a second one rather than overloading the first.

Landscape lighting design in Lawrenceville & Gwinnett County

We provide landscape lighting across Lawrenceville and nearby communities including Suwanee, Duluth, Snellville, Grayson, Dacula, Lilburn and Buford, plus much of metro Atlanta — Buckhead, Brookhaven, Sandy Springs, Chamblee, Midtown, Druid Hills and more. Our electricians are Georgia-licensed, insured, and familiar with local permit and inspection requirements.

Low-Voltage Landscape Lighting, Lawrenceville GA

Whether it is a few path lights or the whole front elevation, it is one system on one transformer, designed to be extended later.

  • Landscape lighting installation — complete low-voltage systems designed around how you use the yard.
  • Outdoor landscape lighting — path, accent and security light working as one system.
  • Low voltage landscape lighting — 12-volt fixtures that are safe around plantings and pets.
  • Path lighting installation — walkways and garden paths lit for safe footing.
  • Uplighting installation — trees, columns and facades lit from ground level.
  • Landscape lighting transformer — transformers sized with headroom and put on timer control.
  • Landscape lighting repair — dim runs, dead fixtures and cut cable located and fixed.
  • Yard lighting electrician — the outdoor outlet and the low-voltage system from one contractor.
  • Low voltage outdoor lighting installation — 12-volt systems that are safe to work around plantings and pets.
  • Landscape lighting transformer sizing — sized with headroom so you can add fixtures later without an upgrade.
  • Low voltage landscape lighting near me — Low-voltage landscape lighting design and installation across Lawrenceville and Gwinnett County — path lights, uplights and accent fixtures.
  • Landscape lighting near me — Landscape lighting installation near Lawrenceville — we design the layout, install the transformer and wire every fixture to code.

Who We Serve

Homes and businesses across Lawrenceville, Gwinnett County and metro Atlanta.

Residential Electrical Services in Lawrenceville, GA

Low-voltage path, up-light and accent lighting with correctly sized transformers, buried cable and timer or photocell control.

Commercial Electrical Services in Lawrenceville, GA

Commercial landscape and building accent lighting designed for curb appeal, safety and energy efficiency.

Why Us

Why Choose Lawrenceville Electrician Co

The right lighting turns a yard into a property.

Workmanship Warranty

Every repair and installation carries a written workmanship warranty, plus manufacturer warranties on the parts we supply.

Licensed & Insured

Georgia-licensed electrical contractor, fully insured, and every technician is background-checked and uniformed.

Clean, Respectful Work

Shoe covers, drop cloths, and we haul away the old material. We explain what we did and why before we leave.

Upfront Flat-Rate Pricing

You approve a clear price before any work begins, with same-day appointments and true 24/7 emergency response.

Service Area

Areas We Serve

Based at 241 Lawrenceville Hwy, we serve Lawrenceville, Gwinnett County and communities across metro Atlanta. Full list in the footer below.

FAQ

Frequently Asked Questions

What is the benefit of low-voltage landscape lighting?

Low-voltage (12V) landscape lighting is safer, easier to install and less expensive to operate than line-voltage alternatives. The wire can be direct-buried without conduit, the fixtures are safe to handle even when energised, and the energy cost for a typical residential system is pennies per night. It also allows fine control over dimming and zoning from a single transformer with multiple circuits.

Can I add more lights to my existing landscape system later?

Yes, as long as the transformer has capacity and the wire gauge can handle the additional load without excessive voltage drop. We check both before adding fixtures. If the transformer is maxed out, we add a second one rather than overloading the first. If the wire run is at its length limit, we add a new home run. Expandability is one of the advantages of low-voltage systems.

Why are the lights at the end of my run dimmer?

That’s voltage drop — the longer the wire run, the more voltage is lost to resistance in the cable. The last fixture on a long daisy-chained run can receive significantly less than 12 volts, which makes it noticeably dimmer. The fix is either a heavier-gauge wire, a shorter run, or a hub-and-spoke wiring layout where each fixture gets its own home run of equal length from the transformer.

Do you install the outdoor outlet as well?

Yes. If you don’t have a GFCI-protected outdoor outlet near the transformer location, we install one as part of the landscape lighting job. The outlet gets its own circuit or shares an outdoor circuit that has room, with a weatherproof in-use cover and proper code-compliant burial depth for the supply wiring. Everything is permitted and inspected as part of the project.

Want Landscape Lighting?

Low-voltage path, accent and up-lighting that looks great and lasts, installed by a licensed electrician.

Call Electrician Now